Outdoor Camera (XOCD2) CB54

The Wi-FI Camera allows users to live stream video to their Smart Phone and Android TV applications. The wireless camera can easily be installed as an outdoor or Indoor camera unit.

Product Features

The following are the key product features

1. PIR Motion Detection:

On motion detection, the camera will send an alert to your smartphone.

2. Built-in invisible Infrared (IR) light providing night vision capability.

• IR mode ON - Night vision function enabled, Infrared is ON.

• IR mode OFF - Night vision function 1s disabled and the device is set to Day Mode.

3.  1080P FHD: High-definition images with low noise.

Watch your home in true color 1080P FHD day and night, See up to 10 meters away in the dark. Videos can be viewed anywhere anytime from iOS or Android smartphones.

4. Two-way audio:

• Input: Mic

• Output: Speaker

5.  Cloud Streaming:

Live streaming and cloud video recording

6. Long battery life:

Increased battery life provided by 6400mAh battery

7. H.264+:

Video Compression technology provides faster streaming & greater storage capacity.

The outdoor camera (XOCD2) adopts a novel ellipse and compact design with a simple black-and-white housing.

It's stylish enough to embellish your life but simple enough to look good anywhere. What's more, its weatherproof design keeps it operating without being interrupted by any kind of weather wind, rain, or snow.

LED Indications:

Camera Installation:

Step 1:

Punch three holes on the mounting surface according to the size and position of the bracket screw holes. Place the rubber raw plugs in the holes.

Step 2:

Fix the bracket on the mounting surface with the screws.

Step 3:

Align the rear screw hole of the camera to the bracket and fix it with the screw.

Tighten and adjust the camera position.

Factory Reset:

Turn the power switch to "ON" and hold the RESET button for 5 seconds until the camera Issues a voice prompt "Factory reset complete".

Turn OFF

To turn OFF the Camera, press and hold the Power Switch button for 2 seconds.

Pre-setup

For the first time use, please plug in the USB cable and power the battery to 100%

• Turn the Power switch button to "ON"

• The recommendation is to place the camera within 2 meters of the Home Gateway

• Connect the phone to the WI-FI network

• To download and Install the application, scan the QR code for the stc myhome application printed below.

• Login to the stc myhome application using your stc account credentials and follow the procedure below to add the wireless camera.

How to include and exclude an outdoor wireless camera

Include Outdoor Camera

Follow the inclusion steps by clicking on the link mentioned below:

Include Camera

Exclude Outdoor Camera

Follow the exclusion steps by clicking on the link mentioned below:

Exclude Camera