Door Bell Camera - XD2 (Xunison) / DB2

• PIR Human Detection: On human detection, the camera will push an alert to your smartphone.
• Built-in invisible Infrared (IR) light providing night vision capability: IR mode ON - night vision function enabled, infrared is ON IR mode OFF - night vision function is disabled and the device is set to Day Mode
• 1080P FHD: High-definition images with low noise. View Angle: 126°
• Two-way audio: Input: Mic Output: Speaker
• Cloud Streaming: Livestreaming and cloud video recording* (*Cloud video recording depends on the service provider)
• Long battery life: Increased battery life provided by 5000mAh battery

Specifications:

Product Introduction

LED Indicator Status

Factory Reset

When the doorbell is “ON”, press the RESET button for 5 seconds until the RED light flashes and a drop sound is emitted, indicating the RESET is successful.

Installation

Tear off the 3M adhesive sticker on the back of the mounting plate.

Tear off the 3M adhesive sticker on the back of the mounting plate.

Note: It is recommended to place the mounting plate at the same level as the peephole viewer of your door. Paste the plate to the side of the door.

Fix the screws (available in the screw pack) on the mounting plate. Affix the front part of the doorbell to the mounting plate and push it down slightly on the hole of the mounting plate.

Tighten the screw at the side of the doorbell.

Pre-Setup

Insert the batteries in the correct position.

1. For first-time use, please plug in the USB cable and power the device to 100% 2. It is recommended to place the doorbell camera within 2 meters of the router during device pairing. 3. Connect the phone to the Wi-Fi network, please note the doorbell camera only supports 2.4GHz.

App Download

To download and install the application, scan the QR Code for the X-Home application printed on the package label.

The app can also be downloaded from the Google Play Store or App Store.

Register or log in to the X-Home application using your Xunison account credentials and follow the procedure below to add the Doorbell Camera.

How To Include Doorbell Camera:

Include Camera

How To Exclude Doorbell Camera:

Exclude camera