Outdoor Camera (XCOU-1)

Product Introduction

The Outdoor Wi-Fi Camera allows the user to live stream video to their Smart Phone App and Android TV.

Product Features

The following are the key product features

1. PIR Human Detection: On human detection, the camera will send an alert to your mobile phone.

2. 1080P FHD: High Definition images with low noise view angle: 97.30 °

3. H.264: Video compression technology provides faster streaming and greater storage capacity.

4. Two-way audio: Input Mic Output: Speaker

5. Network: Wi-Fi

6. Night Vision (15 meters): HD night vision with inbuilt Infrared (IR) lens motion detection sends alerts to the client applications on motion detection.

7. TFcard slot: Storage up to 256 GB.

Camera Specifications


Sorts	Type	Parameter
Feature	Selling points	Wireless connection Remote active wake up, quick start, two-way speaking Pir+ radar dual sensor alarm recording, begin to recording in one-second Intelligence human motion detection Intelligent alarm push 5000mAh battery power supply, low battery remind Ultra-low-power system optimization Free cloud storage alarm recording
System	Operating system	Linux
Online visitor	Support 4 visitors at the same time
CPU	T31 ZL
Collection	Image sensor	GC2053,1/2.9 inch 1080p progressive scan CMOS sensor (200W/400W optional,PCB compatibility)
Minimum Illumination	0.3~0.5Lux(color mode),0Lux((B&W mode)
Lens	Standard M12lens
Viewing angle	110(Diagonal)
Night vision	Photosensitive filter with auto-switching,6pcs 850nm SMD IR LED, IR irradiation distance:5~10 m
Video	Compression standard	H.265 main Profile/H.264 Baseline Profile/MJPEF/JPEG Baseline
Multi-stream	1080P 30fps+VGA 30fps+360P 4fps JPEG
Compression standard/Bit Rate	CBR/VBR Two code rate control modes, the output code rate range is 128~4096kbps
Image adjustment	Brightness, contrast, saturation, and chroma are adjustable
Audio	Input	Built-in 38db microphone
Output	Built-in 8 1 w speakers
Sampling frequency/bit width	8KHz/16bit
Compression standard/Bit Rate	ADPCM/32kbps
Network	Network protocol	TCP/IP,HTTP,TCP,UDP,DHCP,DNS,NTP,P2P,etc.
Wireless network	IEEE802.11b/g/n
Wireless frequency	2.4~2.4835GHz
Wireless security encryption	64/128-bit WEP/WPA-PSK/WPA2-PSK data encryption
Wireless connection	AP mode connection, Scan the QR code to the network
Button	Press button 1	Switch the on/off button
Press button 2	N/A
Reset button	Hold on to restore the factory default settings

LED Indicator Status

Battery Installation

Unscrew the bottom screw and open the back cover.
Place the two batteries in the battery compartment ensuring the battery direction and polarity are correct. Close the back cover.
Tighten the screw ensuring the compartment is secure

Battery Installation

Battery Installation Unscrew the bottom screw and open the back cover. Place the two batteries in the battery compartment ensuring the battery direction and polarity are correct. Close the back cover.

Battery Information The camera comes with rechargeable 18650 batteries. The 18650 battery is a Li-ion battery named after its 18mm × 65mm cylindrical size (diameter × height).

Camera Installation

Step 1: Punch three holes on the mounting surface according to the size and position of the screw holes of the bracket. Place the rubber rawl plugs in the holies.

Step 2: Fix the bracket on the mounting surface with the screws.

Step 3: Align the rear screw hole of the camera to the bracket and fix it with the screw. Tighten and adjust the camera position.

Note: Please keep the camera out of direct sunlight.

Factory Reset

Turn the power switch to "ON" and hold the reset button for 5 seconds until the camera issues a voice prompt "Reset Complete".

Pre-Setup

Insert the batteries in the correct position. For first-time use, please plug in the USB cable and power the device to 100%. Turn the mode switch button to "ON". It is recommended to place the camera within 2 meters of the home gateway. Connect the phone to the Wi-Fi network, please note the camera supports 2.4GHz.

APP Download

To download and install the application, scan the QR Code for the X-Home application printed on the package label.

The app can also be downloaded from the Google Play Store or App Store.

Register or login to the X-Home application using your Xunison account credentials and follow the procedure below to add the Doorbell Camera.

Note: Please connect your camera with the USB cable (Power connection) for camera inclusion. Once the device is included successfully and charged to 100%, disconnect the USB cable.

Include Outdoor Camera

Follow the inclusion steps by clicking on the link mentioned below:

Include camera

Exclude Outdoor Camera

Follow the exclusion steps by clicking on the link mentioned below:

Exclude camera

Previous Indoor Camera / (Xunison XCI1) CB71

Next Outdoor Camera (XOCD2) CB54