Door Bell Camera DB4

• PIR Human Detection: On human detection, the camera will push an alert to your mobile phone.
• Built-in invisible Infrared (IR) light provides night vision capability. IR mode ON - night vision function enabled, infrared is ON IR mode OFF - night vision function is disabled and the device is set to Day Mode
• 1080P FHD: High-definition images with low noise. View Angle: 126°
• Two-way audio: Input: Mic Output: Speaker

Specifications

LED Indicators Status

Factory Reset

Press the "Reset" button indicated by the arrow in the image.

Installation

Tear off the 3M adhesive sticker on the back of the mounting plate.

Tear off the 3M adhesive sticker on the back of the mounting plate.

Note: It is recommended to place the mounting plate at the same level as the peephole viewer of your door. Paste the plate to the side of the door.

Fix the screws (available in the screw pack) on the mounting plate. Affix the front part of the doorbell to the mounting plate and push it down slightly on the hole of the mounting plate.

Balance the doorbell so that it is aligned with the plate and gently push it down. Then tighten the bell screw door tightly.

Pre-Setup

Insert the batteries in the correct position.

1. For first-time use, please plug in the USB cable and power the device to 100% 2. It is recommended to place the doorbell camera within 2 meters of the router during device pairing. 3. Connect the phone to the Wi-Fi network, please note the doorbell camera only supports 2.4GHz.

App Download

To download and install the application, scan the QR Code for the X-Home application printed on the package label.

The app can also be downloaded from the Google Play Store or App Store.

Register or log in to the X-Home application using your Xunison account credentials and follow the procedure below to add the Doorbell Camera.

Include Doorbell Camera

Follow the inclusion steps by clicking on the link mentioned below:

Include Camera

Exclude Doorbell Camera

Follow the exclusion steps by clicking on the link mentioned below:

Exclude Camera