Product Data Sheet

Product Introduction

Xunison Hub M50 Mesh Tower is a high-performance router with powerful Wi-Fi, a 2.4 GHz rate of up to 574 Mbps, a 5GHz rate of up to 1201 Mbps, and a dual-frequency wireless concurrency rate of up to 1800 Mbps.

The product offers powerful smooth connectivity for gameplay, live streaming, and online education.

Product Specifications

Device Images

Product Installation

Ensure the cables are connected.

Power ON:

Connect the power adapter to the router's POWER port, then plug the power adapter into the wall socket. The LED RED light should be displayed indicating the device is powered ON.

Router Configuration 1. Once the router is set up, connect your PC/Laptop to the router's Wi-Fi network by entering the SSID printed on the label located at the bottom of the router.

2. Enter 172.30.55.1 on the browser to log in to the Web UI and follow the instructions below. Once connected, You can select any of the three Internet access methods:

PPPoE Select "Broadband Dial-up (PPPoE)", and enter the broadband account and broadband password provided by your network operator. Click “Next step”.

2.2.2 Automatic Internet access(DHCP) Select "Automatic Internet Access(DHCP)" and just Click "Next step".

Static IP Select "Manually surf the internet". Enter the IP address, default gateway, and the DNS information provided by the operator.

Note: You need to set the network parameters provided by the operator or the administrator to connect to the internet normally.

3. Enter the Wi-Fi SSID (2.4G and 5G) and password. Click “Finish setting”.

Note: Select the checkbox to keep the administrator/management password the same as the Wi-Fi password. The dual-frequency unification function is enabled by default. You can turn on the dual-frequency unification function if you need to set two separate Wi-Fi names.

LED Indicators

Ports and Interfaces

Device Identification

Previous Get Started

Next Quick User Guide