Include Z-wave Device

Note: It is important to exclude Z-Wave devices before inclusion, follow the link below that describes how to exclude Z-wave devices.
https://app.archbee.com/doc/IH7Tgwp2hg6eXkCD7FRQ8/b0MCbakih2T7HLf7j7GEa

Follow the below steps to add a Z-Wave device:

Step 1: Select "Smart Home"

Select "Smart home" from the dashboard.

Step 2: Select "Devices"

Select Devices from the left side menu under the smart home section.

Step 3: Add New Device

Click on "Add New Device".

Step 4: Include a Z-Wave

Select "Include New Device" and then Select "Z-Wave".

Step 5: Pairing Z-Wave

Click "Search" and press the pair button thrice on the Z-Wave device. Press the button within 1.5 seconds.

Click "YES" to add another device else click "NO".

In case, you select No, then you will be redirected to the below webpage. Click on Save. and you will be directed to the All Devices page.

You can see the device is added successfully.