1. Xunison
  2. Explore Our Products
  3. Platforms
  4. iOS Application
  5. Settings
  6. How to Set up Repeater Mode?

How to Set up Repeater Mode?


Follow the steps below to set up the repeater mode:

Step 1: Settings

Select "Settings " from the left menu.

Settings


Step 2: Set up Wizard

Select "Set up Wizard" in the settings section.

Set up Wizard


Step 3: Timezone

Select "Timezone" from here and press ">" from the right-hand side.

Timezone


OR

you can select the phone's default TimeZone.

Click on the swipe arrow to proceed ahead.

Timezone


Step 4: Admin Password

Press ">" from the right-hand side

Note: Here you can change the router password.

Admin Password


Step 5: Select Mode

Tap on router mode and select the "Repeater" mode.

Press ">" from the right-hand side.

Select mode - Repeater


Step 6: SCAN

Click on "Scan".

Scan


Step 7: Select The Network

Select the Wi-Fi network.

Document image

Step 8: Enter The Password

Enter the correct password of the selected network here and press ">" from the right-hand side.

Enter The Password


Step 9: Finish Setup

Press "Finish Setup" to complete the wizard it takes approximately 6 to 7 minutes.

Finish Setup


Step 10: Setup Done

The router settings have been updated successfully.

Router settings have been updated


Previous How To Set up Router Mode?
Next How To Factory Reset Smart Home?