Include Camera

Note:

Log in to your Xunison Application and you will be directed to the home gateway.

Select the home gateway and proceed ahead.

Step 1: Smart Home Section

Select "Smart Home" from the left menu.

Step 2: Press"+"

Press "+" at the top right corner of the screen.

Step 3: Include Device

Select "Include Device".

Step 4: Camera

Select "Camera".

Step 5: Wi-Fi Network

Select the wireless network to connect the camera or select another network.

(Note: Make sure the camera is powered on and there is a good Wi-Fi signal on your smartphone).

Step 6: Scan QR Code

Scan the QR Code which is printed on the device packaging.

Step 7: Installation Conditions

Kindly check the conditions mentioned on your mobile and click on "Let's set up".

Step 8: Show The QR Code To Your Camera

Show this QR Code to your camera. Move the phone closer or further to the camera until it beeps.

Face the generated QR Code to the camera and keep a distance of 10-30 cm.

There will be a single beep from the camera.

The camera is successfully added.

Camera full preview.

Tap on the camera and you will be able to view full-screen.