Include Zigbee Device

Note:

Log in to your Xunison Application and you will be directed to the home gateway.

Select the home gateway and proceed ahead.

Follow the steps below to set include the Zigbee devices :

Step 1: Smart Home Section

Select "Smart Home" on the left menu.

Step 2: Press "+"

Press "+" at the top right corner of the image.

Step 3: Include Device

Select "Include Device".

Step 4: Select "Zigbee Device"

Select "ZigBee device".

Step 5: Search

Press "Search". Long press with a pin-to-hole for 5-10 seconds on a Zigbee device.

The Pairing light will blink 5 times on the Zigbee device.

Step 6: Inclusion Process

Searching for a Zigbee device. The device will be included within 60 seconds.

Step 7: Inclusion Done

The image below shows that the Zigbee device is included.

Here you can see that the "Door / Window Sensor" is added successfully.

Device Successfully Included:

The device has been added successfully. The device will reflect in the Devices section.