Another way to include Z-Wave device

Note: It is important to exclude Z-Wave devices before inclusion, follow the section below that describes how to exclude Z-wave devices.

To exclude Z-Wave devices, click on the link mentioned below:
https://app.archbee.com/docs/DDQ3m5qwi8GUSkgmC7g3f/iGOpffpuFQTHx_qEM5ktF

Note:

Log in to your Xunison Application and you will be directed to the home gateway.

Select the home gateway and proceed ahead.

Step 1: Smart Home Section

Select Smart Home on the left menu.

Step 2: Include the Device

Select the Room section under the smart home.

NOTE:

If the room is already created then you can include the device from the room, however, if not, then you can follow the instructions mentioned below to create a room:

https://app.archbee.com/doc/wKWRhfdhvcyxB6QXs754b/lUvibXXcxndCh-QVGebUv

Step 3: Select "Z-Wave Device"

Step 4: Press "Search"

Press "Search" and press the pair button thrice on the Z-Wave device within 1.5 seconds.

Step 5: Inclusion

Search for a Z-Wave device to include.

Step 6: Device Inclusion

The device inclusion is in process with a timeout of 90 seconds.

Note : Blue: Device in pairing mode

Orange: Setting up the found devices.

Step 7: Device Included

The device is included successfully. You can see the "Siren" is added in the image below.

The device has been added successfully. The device will reflect in the Devices section.