Provisioning Of The Home Gateway

Please follow the steps below to provision the account to your gateway.

Note: Either follow the router mode from Step 6a or repeater mode from step 6b to complete the wizard.

Once you log in to Xunison Application, you can add a new home gateway from here. Click on "+" to add the new gateway.

You have the option to Scan a QR Code. The QR Code is available at the bottom of your router.

You can connect your mobile to the XBrain network and run the LAN SEARCH.

Below steps are for Scan QR Code.

Select the option "Scan QR Code". The option to scan the QR code is available on your smartphone. Point your camera to the QR code and scan.

Gateway found. Select "Add Gateway".

Add the gateway name.

Select your time zone from here and press on the swipe arrow.

you can select the phone's default time zone. Click on the swipe arrow to proceed ahead.

Here you have the option to keep the default password or set up another one. Click on the swipe arrow.

Select the mode router and click on the swipe arrow.

Click on finish setup.

Note: The option to change the Wi-Fi SSID and password is available here.

Gateway is added successfully.

You can also select the repeater mode for your X-Brain device.

Tap on the router mode and select the repeater mode

Press "SCAN".

Select the Wi-Fi network from here to which you want to extend the network.

Enter the correct password of the selected network and Press on the swipe arrow.

Click on "Finish setup".

Note: The option to change the Wi-Fi SSID and password is available here.